MATCHING · 3 min read

Tile Connect Guide: Paths With Two Turns

Tile Connect asks you to join two identical tiles with a path that bends at most twice and crosses no other tile. A small amount of planning makes a large difference.

Try it now →

Understand the path rule

Two tiles can be matched if you can draw a line between them with no more than two corners, along empty squares. The path may run through the empty border around the board. That border is why tiles at the edge are so much easier to match than tiles in the middle.

★★◆●Two corners: up, across, down
These two matching tiles connect with a path that turns twice.

Clear the outside first

Tiles near the edge have more routes available. Clearing them opens lanes for tiles deeper in the board. Early in a game, it is usually better to remove a pair from the outside than one from the centre, even if the central pair looks easier.

Do not strand a pair

Paths turn through empty cells, including the outside border. An occupied tile cannot serve as a corner for another pair. Removing a legal pair opens space and cannot block an existing route between remaining tiles.

When a symbol appears four or more times, choosing which two copies to remove changes which copies remain. Consider whether the remaining copies can connect, or whether other removable pairs will open a route for them. That partner choice is different from losing a path because a tile was removed.

Scan for obvious pairs

Start by looking for tiles in the same row or column with nothing between them. Then look for pairs that share one corner. Save the longer routes with two corners for last. A systematic scan of one row at a time finds moves that a quick glance misses.

Use reshuffles wisely

If no pairs remain, a reshuffle redistributes the tiles. Use it when you are truly stuck, not as a first move, and check the board afterwards for easy pairs. Reshuffles are free in PlayDapple, so there is no penalty for needing one.

Hints and difficulty

Hints highlight a matching pair if one exists. They are useful for learning to see paths, but try a scan yourself first. Larger boards have more tiles and more routes, but the same ideas apply.

Worked example of a two-corner path

Imagine two matching tiles on different rows and columns, with other tiles around them. To connect them, you can go out from the first tile along its row to an empty column, turn towards the second tile’s row, then turn again into the second tile. That is two corners. If the column you needed is blocked, try going via the border instead, which is empty.

Always check both ways: row first, then column, or column first, then row. The two routes use different squares, and one may be open when the other is blocked.

Common mistakes

A frequent mistake is overlooking the empty border. Try both a row-first and a column-first route, count no more than two turns, and check every intervening cell for an obstruction.

If several copies of a symbol are present, inspect the copies that will remain after your match. Use Hint before reshuffling if you cannot see a route; a missed border route may still be available.

Planning the endgame

As tiles disappear, there are more empty routes. If a remaining pair is blocked, look for a different legal pair whose removal clears its row or column. Removing tiles never adds an obstruction.

A shuffled layout is guaranteed to offer a match, not a complete sequence to the end. If no legal pair remains, use the free Shuffle control and continue. A needed shuffle is not evidence that you removed a supporting corner.

Play it now →

Related guides

← All guides